Model Features:
- Can cut all kinds of graphics on planiform plates.
- High precision, fast speed, narrow cutting seam, minimum heat affected zone, smooth cutting surface without burrs.
- The laser cutting head will not touch the surface of the material and will not scratch the workpiece.
- Narrow thin kerf, small heat-affected zone, minimal local deformation of the workpiece, no mechanical deformation.
- Good processing flexibility, can process any graphics.
- It can cut steel plate, stainless steel, aluminum alloy plate, hard alloy and other hard materials without deformation.
- The parallel exchange platform is used to complete the exchange within 20 seconds, which greatly improves the
processing efficiency.
- Low power consumption, no reaction gas required, compressed air is used as auxiliary gas for laser cutting.
Model Profile:
6020 Series The laser cutting machine is a fiber laser cutting machine with advanced structural design and excellent
machine tool performance. It uses a world-class CNC system and fiber laser. The gantry double-drive structure is applied,
and the integral welded base is adopted. It adopts a rack and pinion transmission structure with fast speed, high accuracy,
and one-time cutting and forming without subsequent processing. Greatly improve processing efficiency; visible layout,
close fit, saving materials. Advanced technology can increase the speed of your company's new product development and
recover your equipment investment cost as soon as possible.
Machine Parameters:
| S/N |
Name |
Model |
Remarks |
| 1 |
High power fiber laser cutting machine |
ML-CB-6020T |
Purple Horn |
| 2 |
Numerical control system |
CypCut |
Shanghai Bochu |
| 3 |
Servo drive |
Fuji |
Japan |
| 4 |
Reducer |
Modoli |
France |
| 5 |
X, Y-axis rack |
YYC |
Taiwan China |
| 6 |
Z-axis lead screw |
HIWIN |
Taiwan China |
| 7 |
Linear guide rail |
HIWIN |
Taiwan China |
| 8 |
Laser |
MAX/RECI/IPG |
China/German |
| 9 |
Cutting head |
Osprey |
China |
| 10 |
Cooling-water machine |
Teyu |
China |
| 11 |
Pneumatic components |
SMC (or equivalent) |
Japan |
| 12 |
Electrical components |
Schneider (or equivalent) |
France |
Technical Specifications:
| S/N |
Specifications |
Remarks |
| 1 |
Processing format (L * W)
|
6000*2000mm |
|
| 2 |
X-axis stroke |
2010mm |
|
| 3 |
Travel Y-axis |
6010mm |
|
| 4 |
Z-axis stroke |
90mm |
|
| 5 |
Positioning accuracy of X / Y axis |
±0.05mm/m |
|
| 6 |
X / Y axis repeat positioning accuracy |
±0.03mm |
|
| 7 |
Acceleration of Idle operation |
1.0G |
|
| 8 |
Processing acceleration |
0.5-1.0G |
|
| 9 |
Synthesis speed of X / Y axis |
90m/min |
|
| 10 |
Machine weight |
About 5000KG |
Refer to the actual product |
| 11 |
Maximum load of machine tool |
1000KG |
|
| 12 |
Floor area of the whole machine |
15000*3100*2200mm |
Refer to the actual product |
| 13 |
Voltage frequency |
Three phase five wire 380V 50Hz |
|
| 14 |
Cooling mode |
Water-cooling |
|
| 15 |
Support graphic format |
PLT, DXF, etc. |
Up to the operation system |
Cutting Process Parameters
There are differences due to different types of cutting head and laser. Taking 1500W as an example, the following parameters are for reference only:
| S/N |
Material |
Thickness(mm) |
Speed(m/min) |
Auxiliary gas |
| 1 |
Stainless Steel |
1 |
35-45 |
HP N2 |
| 2 |
Stainless Steel |
2 |
12-18 |
HP N2 |
| 3 |
Stainless Steel |
3 |
4.5-5.5 |
HP N2 |
| 4 |
Stainless Steel |
4 |
2.5-3.5 |
HP N2 |
| 5 |
Stainless Steel |
5 |
1.5-2.0 |
HP N2 |
| 6 |
Stainless Steel |
6 |
0.8-0.9 |
HP N2 |
| 7 |
Stainless Steel |
8 |
0.2-0.3 |
HP N2 |
| 8 |
Carbon steel |
1 |
16-20 |
O2 |
| 9 |
Carbon steel |
2 |
7.8-8.3 |
O2 |
| 10 |
Carbon steel |
3 |
4.6-5.2 |
O2 |
| 11 |
Carbon steel |
4 |
2.5-3.0 |
O2 |
| 12 |
Carbon steel |
5 |
2.0-2.5 |
O2 |
| 13 |
Carbon steel |
6 |
1.7-2.0 |
O2 |
| 14 |
Carbon steel |
8 |
1.2-1.5 |
O2 |
| 15 |
Carbon steel |
10 |
1.0-1.2 |
O2 |
| 16 |
Carbon steel |
12 |
0.8-0.9 |
O2 |
| 17 |
Carbon steel |
16 |
0.5-0.7 |
O2 |
| 18 |
Aluminum |
1 |
23-35 |
HP N2 |
| 19 |
Aluminum |
2 |
7.5-9 |
HP N2 |
| 20 |
Aluminum |
3 |
4-5 |
HP N2 |
| 21 |
Aluminum |
4 |
2-2.5 |
HP N2 |
| 22 |
Aluminum |
5 |
0.9-1.3 |
HP N2 |
| 23 |
Aluminum |
6 |
0.5-0.7 |
HP N2 |
| 24 |
Aluminum |
8 |
0.2-0.25 |
HP N2 |
Product Tags:
|
|
Large Breadth Industry Laser Cutting Machine for Metal Plate Cutting Full Enclosed Europe Laser Cutter CE Certificate Images
|
